157 lines
5.6 KiB
Markdown
157 lines
5.6 KiB
Markdown
# R4 Protect Tune - Top And Bottom Speakers Build 21.6.0
|
|
|
|
## Tune Details
|
|
|
|
- **File name**: r4_21.6.0
|
|
- _Device_: CS35L41 revB2
|
|
- _Firmware Version_
|
|
- _Protect_: Playback 6.47.0
|
|
- _Calibration_: Playback 6.47.0
|
|
- _Diagnostics_: Playback 6.47.0
|
|
- _Signal Chain_:
|
|
- _Protect_: Protect Lite
|
|
- _Calibration_: Calibration
|
|
- _Diagnostics_: Calibration and Diagnostics
|
|
- **Amplifier Gain**: 17.5dB
|
|
|
|
### Changelog
|
|
|
|
#### 21.6.0
|
|
|
|
- Top Speaker protect tune 21.5.0 → 21.6.0
|
|
- Recharacterized and retuned to include new limit samples
|
|
- Wael retuned XMAX gain to -24.3 (from -24.5) for slightly safer XMAX
|
|
|
|
#### 21.5.1
|
|
|
|
- Bottom speaker protect tune uprev 21.5.0 → 21.5.1
|
|
- Recharacterized and retuned to include new limit samples
|
|
- All top speaker tunes remain the same as in 21.5.0
|
|
|
|
#### 21.5.0
|
|
|
|
- Updated 21.4.0_withWaelTuning with redc fallback values per customer request.
|
|
- **Top**: 5.402 ohms
|
|
- **Bottom**: 5.445 ohms
|
|
- This change in in the protect bins only. Cal and CalAndDiag bins remain the same as in 21.2.4.0_withWaelTuning
|
|
|
|
#### 21.4.0_withWaelTuning
|
|
|
|
Updated Top Tuning xmax parameters by Wael
|
|
No changes to bottom
|
|
|
|
#### 21.4.0
|
|
|
|
Retune using R4 EVT samples.
|
|
Firmware moved to 6.47.0 for protect, calibration, and diagnostics signal chains.
|
|
|
|
Changes in firmware between 6.45.0 and 6.47.0:
|
|
|
|
- Implemented a timeout feature that allows a maximum delay between the start of the BCLK and the start of the LRCLK.
|
|
If the timeout is exceeded, an error notification is sent to the driver and the command is ignored. This addresses a
|
|
host-side timing issue for these signals that could lead to a no-audio situation.
|
|
- Fixed an issue where repeated pause/resume commands could cause pops on the output.
|
|
|
|
#### 21.2.3_ENG
|
|
|
|
Based on 21.2.2_ENG with HPF cutoff frequencies set to 150Hz for both top and bottom protect tunes
|
|
|
|
- Top speaker protect tune uprev 21.02.2eng → 21.02.3eng
|
|
- Bottom speaker protect tune uprev 21.02.0 → 21.02.1
|
|
- All other files same as 21.2.2_ENG
|
|
|
|
#### 21.2.2_ENG
|
|
|
|
- Engineering build with Tmax of top protect tune fix in place. This is intended to resolve the overshoot issues seen in
|
|
21.2.0 but withthout the de-margin of Tmax that was done in 21.2.1
|
|
- All other files same as 21.2.0
|
|
|
|
#### 21.2.1
|
|
|
|
- Updated Top thermal protect tune after reports of exceeding Tmax
|
|
- All other files same as 21.2.0
|
|
|
|
#### 21.2.0
|
|
|
|
- Initial protect tune
|
|
|
|
### Included files
|
|
|
|
**Readme (This file)**
|
|
|
|
- readme.md
|
|
|
|
**Protect, Calibration, and Diag bins with R Trace**
|
|
_For use in actual phone_
|
|
|
|
- #### Top Speaker
|
|
- Top\r4Top_calAndDiag_21.4.0_pb6.47.0_17.5dB_withRTrace.bin
|
|
- Top\r4Top_cal_21.4.0_pb6.47.0_17.5dB_withRTrace.bin
|
|
- Top\21.6.0_100hpf\r4Top_protect_21.6.0_pb6.47.0_17.5dB_100hpf_withRTrace.bin
|
|
- #### Bottom Speaker
|
|
- Bottom\r4Bottom_calAndDiag_21.4.0_pb6.47.0_17.5dB_withRTrace.bin
|
|
- Bottom\r4Bottom_cal_21.4.0_pb6.47.0_17.5dB_withRTrace.bin
|
|
- Bottom\21.5.1_100hpf\r4Bottom_protect_21.5.1_pb6.47.0_17.5dB_100hpf_withRTrace.bin
|
|
|
|
**Protect & Calibration jsons without R trace**
|
|
_For use on Lochnagar 2 development platform_
|
|
|
|
- #### Top Speaker
|
|
- Top\21.6.0_100hpf\r4Top_21.6.0_pb6.47.0_17.5dB_100hpf_noRTrace.json
|
|
- #### Bottom Speaker
|
|
- Bottom\21.5.1_100hpf\r4Bottom_21.5.1_pb6.47.0_17.5dB_100hpf_noRTrace.json
|
|
|
|
_JSON files contains both protect and calibration deploy groups_
|
|
|
|
**Labsuite Files**
|
|
|
|
- #### Top Speaker
|
|
- Top\21.6.0_100hpf\r4Top_21.6.0_pb6.47.0_17.5dB_100hpf_noRTrace.exported_tuning
|
|
- Top\21.6.0_100hpf\r4Top_21.6.0_pb6.47.0_17.5dB_100hpf_withRTrace.exported_tuning
|
|
- #### Bottom Speaker
|
|
- Bottom\21.5.1_100hpf\r4Bottom_21.5.1_pb6.47.0_17.5dB_100hpf_noRTrace.parameters
|
|
- Bottom\21.5.1_100hpf\r4Bottom_21.5.1_pb6.47.0_17.5dB_100hpf_withRTrace.parameters
|
|
- Bottom\21.5.1_100hpf\r4Bottom_protect_21.5.1_pb6.47.0_17.5dB_100hpf_noRTrace.exported_tuning
|
|
- Bottom\21.5.1_100hpf\r4Bottom_protect_21.5.1_pb6.47.0_17.5dB_100hpf_withRTrace.exported_tuning
|
|
|
|
**Firmware Files**
|
|
_Each firmware wmfw is in a folder respective for which type of bin file it is for_
|
|
|
|
- Firmware\Cal\halo_cspl_RAM_revB2_29.49.0.wmfw
|
|
- Firmware\Diag\halo_cspl_RAM_diag_revB2_29.49.0.wmfw
|
|
- Firmware\Protect\halo_cspl_RAM_revB2_29.49.0.wmfw
|
|
|
|
**Additional data**
|
|
|
|
- r4EvtSpeakerCalAndDiagResults.xlsx
|
|
- CustomerTuneReports\R4_21.5.1_Bottom_CustomerTuneReport.pdf
|
|
- CustomerTuneReports\R4_21.6.0_Top_CustomerTuneReport.pdf
|
|
|
|
---
|
|
|
|
## Speaker Parameters
|
|
|
|
### Top Speaker
|
|
|
|
| PARAMETER | VALUE |
|
|
| ----------------------------------- | ---------------- |
|
|
| **IEC Rated Noise Power (nominal)** | 1 [W] |
|
|
| **Xmax (0-Peak)** | 0.45 [mm] |
|
|
| **Maximum Coil Temperature (Tmax)** | 130 [C] |
|
|
| **Coil co-efficiency (Tk)** | 0.00393 |
|
|
| **DC Resistance** | 6 [Ohms] |
|
|
| **Resonance Frequency** | 820 [Hz] +/-7.5% |
|
|
| **ReDC Fallback** | 5.402 ohms |
|
|
|
|
### Bottom Speaker
|
|
|
|
| PARAMETER | VALUE |
|
|
| ----------------------------------- | --------------------- |
|
|
| **IEC Rated Noise Power (nominal)** | 1.14 [W] |
|
|
| **Xmax (0-Peak)** | 0.55 [mm] |
|
|
| **Maximum Coil Temperature (Tmax)** | 110 [C] |
|
|
| **Coil co-efficiency (Tk)** | 0.00393 |
|
|
| **DC Resistance** | 6.1[Ohm] |
|
|
| **Resonance Frequency** | 720 [Hz] +/- 10% [Hz] |
|
|
| **ReDC Fallback** | 5.445 ohms |
|